High Performance
* Compatible with UART and I2C communication.
* Detecting Range 0.1m~12m
* Much lower power consumption: minimum 85 mW.
* More flexible detecting frequency: increasing the frame rate from 100Hz to 1000Hz.
* Reducing the blind zone to 10cm.
* Supports Pix and customized output protocols.
Safer and More Stable
* IP65 enclosures could effectively prevent water and dust
* Passing drone-level vibration tests
* No fear of outdoor light
* Low effect of temperature changes
* Multiple radars detect the same object without interfering with each other
* Low effect of the reflectivity of the target object
Notes:
1. The maintenance of this product should be done by the professional technician, and the product can only work with the factory spare part for ensuring the performance and safety.
2. This product itself has no polarity and over-voltage protection. Please properly connect and supply power as described in this manual.
3. Operating temperature of this product is between -20℃ and 60℃. Do not use it beyond this temperature range to prevent malfunction.
4. Storage temperature of this product is between -20℃ and 75℃. Do not store it beyond this temperature range to prevent malfunction.
5. For ensuring the product performance, do not open the product shell to do any adjustment or maintenance against the instruction.
6. Detecting object with high reflectivity, such as the mirror or the smooth floor tile, may cause a system malfunction.
7. The product will malfunction if there is any transparent object between it and the detecting object, such as glass or water.
8. The product will malfunction if its emitting or receiving IR-pass filter is covered by the dust. Please keep the IR-pass filters clean. Please do not spread ethyl alcohol on the IR-pass filters, which are made of acrylic, IR-pass filters will be damaged.
9. Please do not pull the fine wire, the wire may be damaged.
10. Please always send the command of save settings when try to modify parameters of TFmini Plus, otherwise the settings will not take effect. Bytes with yellow undertone“SU”represent checksum: sum of all bytes from Head to payload. Lower 8 bits.
Applications
* Detection of vehicle and pedestrian
* Vehicle collision avoidance and safety warning systems
* UAV assisted takeoff and landing
* Altimeter
Specification
1. Product Characteristics
* Detecting Range: 0.1m~12m
* Accuracy: ±5cm@ (0.1-6m), ±1%@(6m-12m)
* Resolution: 5mm
* Frame Rate : 1-1000Hz(adjustable)
* Anti-ambient Light: 70klux
* Operating Temperature: -20℃~60℃
* Protection Degree: IP65
2. Optical Characteristics
* Light Source: LED
* Operating Center Wavelength: 850nm
* Signal Acceptance Angle: 3.6°
3. Electrical Characteristics
* Input Voltage: 5V±0.5V
* Average Current: ≤110mA
* Power Consumption: 550mW (Low Power Mode: 85mW)
* Peak Current: 500mA
* Communication Level: LVTTL (3.3V)
* Communication Interface: UART, I2C, I/O
4. Others
* Enclosure Material: ABS+PC
* Storage Temperature: -20℃~75℃
* Weight: 12g
* Wire Length: 30cm
Shipping List
* TFmini Plus(ToF) Laser Range Sensor x1
* Wiring x1
Ulasan
Belum ada ulasan.