DFRobot FireBeetle ESP32 Micro USB IoT Microcontroller Arduino

DFRobot FireBeetle ESP32 IoT Microcontroller Arduino Support Bluetooth and Wifi ESP-32 Compactible with Arduino IDE

Specification :
– Working voltage : 3.3V
– Input voltage : 3.3V~5V
– Support electric current of low power consumption : 10 μA
– Support maximum discharge current : 600mA
– Support maximum charge current : 500mA
– Support USB charging.
– Processor : Tensilica LX6 dual core Processor (One for high speed connection; one for independent programing).
– Frequency : 240MHz
– SRAM ： 520KB
– Flash ： 16MB
– Wi-Fi standard ： FCC/CE/TELEC/KCC
– Wi-Fi protocol : 802.11 b/g/n/d/e/I/k/r (802.11n, high speed can reach to 150 Mbps)
converge A-MPDU and A-MSDU, supporting 0.4us protecting interval.
– Bluetooth protocol : Comply with BR/EDR/BLE standard of Bluetooth v4.2.
– Bluetooth audio : the current under low power consumption of CVSD and SBC is 10μA
– Working current : 80mA in average
– Frequency range : 2.4GHz ~ 2.5GHz
– Support one-key downloading.
– Support micropython.
– On-chip clock : 40MHz crystal and 32.768 KHz crystal.
– Digital I/O : 10 (default setting of arduino)
– Simulative input : 5(default setting of arduino)
– SPI: 1 (default setting of arduino)
– I2C: 1 (default setting of arduino)
– I2S: 1 (default setting of arduino)
– LED_BUILTIN ： PIN D9
– Interface : FireBeetle series compatible
– Working temperature : -40°C ~ 85°C
– Dimension : 29mm × 58mm
– The dimension of mounting hole : inner diameter 3.1mm and outside diameter 6mm

Package Include :
– FireBeetle ESP32 IOT Microcontroller x1
– 18 pin-2.54mm x2
– 18 female header-2.54mm x2

Untuk Spesifikasi dan Info lebih detail silahkan cek website resmi DFRobot