DFRobot Gravity Tipping Bucket Rainfall Sensor – I2C & UART

DFRobot Gravity Tipping Bucket Rainfall Sensor – I2C & UART

Barang ini bergaransi, mohon baca kartu garansi yang kami lampirkan TERLEBIH DAHULU SEBELUM memakai barang, atau silahkan chat kami untuk info lebih lanjut.
Mohon tanya stock dulu sebelum membeli.

What is a tipping bucket rainfall sensor?
The tipping bucket rainfall sensor is one of the commonly used precipitation monitoring devices in meteorological observations. It consists of a collection container and a measuring mechanism. During rainfall, water enters the collection container through the top inlet and flows into the tipping bucket through a funnel. When a certain amount of water accumulates, the tipping bucket loses its balance and tips over, generating a pulse signal with each tip. By recording the number of pulse signals, the controller can calculate the rainfall amount.
Note: The signal adapter board is not waterproof. Do not expose the signal adapter board to rain.

SPECIFICATION
• Working Voltage: 3.3 to 5.5V DC
• Working Current: ＜3mA
• Output Signal: I2C/UART
• Resolution: 0.28mm
• Operating Temperature: -40 to 85°C
• PCB Size: 32mm x 37mm/1.26 x 1.46 inches
• Tipping Bucket Size: 118mm*59mm*80mm/4.65 x 2.32 x 3.15inches
• Mounting Hole Size: 3.1mm
• Weight: 119g (Tipping bucket), 5.3g (PCB)

Package Include
• Gravity: Tipping Bucket rainfall Sensor x1
• Signal Adapter x1
• Gravity-4P I2C/UART Sensor Connector x1

Untuk Info lebih lanjut silahkan cek wiki dfrobot
https://www.dfrobot.com/product-2689.html