DFRobot FireBeetle 2 ESP32-E IoT Microcontroller Arduino USB Type C

DFRobot FireBeetle 2 ESP32-E IoT Microcontroller Arduino Supports Wi-Fi and Bluetooth Compactible with Arduino IDE

Specification :

– Operating Voltage : 3.3V
– Input Voltage : 3.3V~5.5V
– Support Low-Power : 2mA
– Max Discharge Current : 600mA@3.3V LDO
– Max Charge Current : 500mA
– Support USB Charging
– Processor : Tensilica LX6 dual-core processor (One for high-speed connection; one for independent application development)
– Main Frequency : 240MHz
– SRAM : 520KB
– Flash : 32Mbit
– Wi-Fi Standard : FCC/CE/TELEC/KCC
– Wi-Fi Protocol : 802.11 b/g/n/d/e/i/k/r (802.11n，speed up to 150 Mbps), A-MPDU and A-MSDU Aggregation, support 0.4us guard interval)
– Frequency Range : 2.4~2.5 GHz
– Bluetooth Protocol : Bluetooth v4.2 BR/EDR and BLE standard compliant
– Bluetooth Audio : CVSD and SBC audio
– Operating Current : 80mA（Average）
– Support Arduino download with one-key
– On-chip Clock : 40MHz crystal, 32.768KHz crystal
– Digital I/O x10（Arduino default）
– Analog Input x5（Arduino default）
– SPI x1（Arduino Default）
– IIC x1（Arduino Default）
– I2S x1（Arduino Default）
– RGB_LED : PIN 5/D8
– Connector : FireBeetle V2 series compatible
– Operating Temperature : -40°C ~ 85°C
– Module Size : 25.4×60mm
– Mount Hole Size : inner diameter of 2.0mm

Package Include

– FireBeetle 2 Board ESP32-E x1
– 18pin-2.54mm Pitch Pin x1
– 18pin-2.54mm Pitch Pin Female x1
– 14pin-2.54mm Pitch Pin x1
– 14pin-2.54mm Pitch Pin Female x1

Untuk Spesifikasi dan Info lebih detail silahkan cek website resmi DFRobot